The project also included distributed audio systems. Design work began in the Fall of 2015, and the entire project was completed and unveiled in February.
One of the primary challenges facing First Baptist Church Plant City was utilizing one space for multiple styles of worship, with little time between services to change the platform as needed. Pastor Brian Stowe stated “With our commitment to having blended worship and modern worship, we don’t have hours between services – we have minutes. We have to communicate a different atmosphere while worshiping the same God, and Paragon helped us do that. Which has really helped us reach a demographic that we were having a hard time reaching. Paragon 360 gets today’s church. With a church trying to gap between an older generation and a younger generation, but really trying to bring those two together to have a meaningful worship atmosphere – Paragon really gets it.”
From the initial meetings with Paragon 360, Stowe knew that First Baptist Church Plant City had found the partner that they needed to turn their dream into a reality. “It just became really clear that this (Paragon 360) was who we needed to use. In fact, it was not so much them among others once I had experienced what they had shared with us, and just heard their heart and their vision. I was sold.”
Paragon 360’s Audio Team designed and installed a system for the new Worship Center consisting of a Yamaha CL5 Front of House console with multiple Rio stage racks located on-stage and a QL5 console at the broadcast mix position, all tied together with Dante networking. Sennheiser wireless microphones, in combination with Shure In-Ear Monitoring systems, were utilized for members of the Worship Team and Band. The new JBL VerTec loudspeaker system in the worship center is processed by BSS and powered by Crown. The new ASB7128 subwoofers are deployed in an end-fire configuration to control the directivity of the sub-bass, allowing even coverage throughout the worship center. JBL AC28’s round out the system as delays for the upper sanctuary seating areas. The Commons Area audio system is integrated with distributed audio support for the worship center, and is also a stand-alone system to support baptisms and other special events happening in the commons area. This system is comprised of large format JBL ceiling speakers processed and controlled by BSS, and powered by Crown. A second smaller worship center on campus consists of a Yamaha TF1 audio console with a remote stage rack and JBL SRX series main speaker systems.
The Lighting Team from Paragon 360 designed and installed a system in the new Worship Center that is controlled with an ETC GIO 4K Console, which features an easy to navigate back-lit keypad, motorized faders, and two integrated multi-touch displays. Dimming is powered by ETC’s Sensor3 Power Control racks, a 48-module rack, and an additional 12-module rack. DMX is distributed through a network of DMX opto-splitters and 12 Network Gateways, offering flexibility when assigning or reassigning DMX universes to outputs conveniently placed around the facility. Source Four PARNel fixtures were used for back lighting, and added to FBC Plant City’s inventory of both conventional and LED lighting fixtures. Set pieces were illuminated from within using Iluminarc’s Colorist line of products. A children’s area within the facility utilizes an ETC ColorSource 40 Console to control a fully LED lighting system. Chauvet Ovation E-910FC fixtures were used for front lighting, and Elektralite’s Eyeball Quad was used for back lighting, providing an environment that is not only fun for kids, but works well with the FBC Plant City Staff’s energetic and interactive teaching methods.
Paragon 360’s Video Team designed and installed a video production system at FBC Plant City that is built around an HD-SDI infrastructure with Ross Video components at its core. An NK-3G34 router provides flexible signal routing with a Carbonite Plus handling production switching for broadcast and IMAG in the worship center. Three Panasonic AJ-PX380 manned camera systems and two Vaddio RoboShot PTZ cameras bring video from the Worship Center into the signal flow. The video presentation system is a combined effort using a Mac Pro with Renewed Vision’s ProVideoPlayer and a tvOne CORIOMicro. Together they manage video content for a scenic video wall and 34-foot by 11-foot wide-aspect main screen. Two 16’x9’ side screens provide a canvas for in-house IMAG in the Worship Center. The wide-aspect and IMAG screens are paired with Panasonic RW930 laser projectors, producing 10,000 lumens. A Panasonic RZ-570 laser handles the confidence screen, and two Panasonic EW-730 projectors provide environmental projection, extending the scenic elements out into the house. The scenic video wall consists of six 80-inch displays, providing a three-screen wide modestly wall for the choir and blended services. Three displays on elevators extend to make a 3×2 video wall, providing a large backdrop for the pastor’s message and modern services. The combined power of the CORIOMicro and ProVideoPlayer allow the same scenic background imagery to be displayed on the main screen, scenic video wall, and environmental projection.
Upon completion of the project, Stowe stated “I really appreciate a company like Paragon 360 that takes it from beginning to end. Really, they are able to own it. They know what we want to try to experience or get at the beginning, and then they’re able to communicate that, and then even at the very end, they’re able still to bring that together to help us have that experience – that environment – that we were looking for.”